Sound systems components list with descriptions
FOH (Main) speakers:
Versarray218 Subwoofers
- Dual 18" speaker elements
- 4,800 watts program power rating
QW215 Mid-bass woofers
- Dual 15" speaker elements
- 2,400 watts program power rating
QW1 Upper-mid/High enclosures
- Dual horn loaded 10" speakers
- 4" compression driver mounted on exclusive patented Quadradic Throat Waveguide (TM) horn
- 1,200 watts program power rating on mids
- 400 watts peak power rating on the compression driver
QW2F Mid/High enclosures
- 15" speaker element
- 4" compression driver mounted on exclusive patented Quadradic Throat Waveguide (TM) horn
- 1,200 watts program power rating on the woofer
- 400 watts peak power rating on the compression driver
SP1G Full-range enclosures
- 15" speaker element
- 4" compression driver mounted on 2" throat Constant Directivity (CD) horn
- 900 watts program power rating
Stage monitor speakers:
SP115MX dual-angle wedge
- 15" woofer
- 2" compression driver mounted on 1" throat CD horn
- 1,000 Watts program power rating
- sits at 45° or 30° angle from floor
Amplifiers:
Amp-rack cases contain an assortment of the following types:
- GPS3500 - Used on Versarray 218 subs - each amp rated 3,500 watts @ 4 ohms bridge mode
- GPS2600 - Used on QW215 mid-bass enclosures - each amp rated 2,600 watts @ 4 ohms bridge mode
- GPS1500 - Used on QW2F and QW1 mid/high enclosures - each amp rated 1,500 watts @ 4 ohms bridge mode
- CS800S - Used on SP1G and monitors - each amp rated 400 Watts per channel @ 4 ohms
Mixer
GLD-80 digital mixing console
- 48 input processing channels
- 8 stereo FX returns fed by iLive’s acclaimed FX emulations
- 30 configurable buses
- 20 mix processing channels
- Processing on all inputs - trim, polarity, HPF, insert, gate, 4-band PEQ, compressor and delay
- Processing on all outputs - insert, PEQ, GEQ, compressor and delay
- 16 DCAs / mute groups
Microphones
- PVM 22 - diamond-coated diaphragm mics for vocals
- PVM 45i - hypercardoid mics for instruments
- PVM 520i - large diaphragm mics for kick drums and other low frequency instruments
- PVM 480 - condenser microphone for drum kit overhead or other distance micing applications
- ACT-707 - wireless microphone systems (handhelds, lavalieres, and headsets)
Ancillary devices:
- VSX-26 - Digital (DSP based) loudspeaker management system processors (crossovers, time alignment, equalization, etc.)
- Kosmos Pro - Sub harmonic generator and stereo image enhancement processor
- AR2412 rack (24 XLR inputs, 12 XLR outs) connected via CAT5 cable using dSNAKE protocol